• Positive Lock
• Accuracy .001” over 6” travel
• 4 way measurement: Inside, Outside, Depth and Step
• Frame is calibrated in inches and decimals
• MCD00006 marked in 0.001” increments
• MCDF00006 marked in 1/64” fractional increments and 0.01” decimals increments Learn More

Blades are for cutting brass, aluminum extrusions, solid bars, angle, channel shapes and even
works great on melamine and plastics. They have a triple chip tooth design to distribute chip load
and provide long cutting life. Special steel alloy body is hardened and tensioned for chatter free
running. Large gullets prevent clogging, a 10 degree negative hook angle, and copper plugged
expansion slots to reduce noise. Suitable for use on table, radial arm and miter saws. Learn More

These combination blades are for ripping and crosscutting all kinds of wood, plywood, particle
board and laminated material. They feature copper plugged expansion slots to reduce noise. Learn More

These Thin Kerf blades feature expansion slots and heat vents. Great for ripping or
crosscutting all kinds of wood, plywood, and particle board. The extra safety Anti-Kick
Tooth design will not grab the material. Learn More

Compound miter blades provide smooth, chip free cuts in all kinds of wood, laminated plywood,
particle board, and plastics. They feature copper plugged expansion slots to reduce noise. Learn More

Thin kerf design and ATB Top Angle is ideal for cordless portable machines using less
power to cut through material. Great for ripping and crosscutting all types of wood. Learn More

All digital calipers feature an oversized display for easy to read
measurements in both Inches and Millimeters.
• Resolution: 0.01mm / 0.0005”
• Repeatability: 0.01mm / 0.0005”
• Accuracy: +/-0.02mm / +/-0.001”
• Power: 1.5v SR44 - 1 battery
• 6” and larger calipers have a built in interface port (RS-232 adapter)
in the upper right side of the slider Learn More

Negative hook safety design for use on gas
powered machines. All tips are C-3 tungsten
carbide on a heat-treated steel alloy body
that is surface ground for uniform thickness. Learn More

Negative hook safety design for use on gas powered machines. All
tips are C-1 tungsten carbide on a heat-treated steel alloy body that
is surface ground for uniform thickness. Learn More